1. The burrs must be on the surface of the mechanical mounting surface to clean the dirt before scratching.

2. Using a torque wrench, the tightening torque selected according to the platform material will slowly slide and tighten the screw.

3. Tighten the center to both sides, wrap the screws around the guide rail, and slightly match the guide rail with the installation surface. The sequence starts from the middle of the rail to the ends and tightens with more stable precision. After the machine is lowered, it can be tightened slightly. The lateral force of the reinforced guide rail is forced to bear, so that the main guide rail can be precisely matched with the machine.

4. Lightly placed on the mobile platform separated from the machine tool and the track

5. Lock the lateral force of the screw on the mobile platform, and lock it in the following order to fix the positioning.

6. The main bed guide rail is gently placed on the desktop and fixed with horizontal screws or other fixing fixtures, so that the line and the side mounting surface are lightly matched.

7. Use the same method to install the rails and install the main rail on a separate slide rail.

For more information, pay attention to the official website of Guangdong TICO Automation!