Question 1: What is the name of the linear module?

A: The linear module is also a single-axis manipulator. In China, it is also called electric slide, single-axis drive, single-axis robot, servo slide, linear slide, electric cylinder slide, etc.

Question 2: Are linear modules and linear modules the same in structure? Are they all made of linear guides?

A: The concepts of linear modules and linear modules are the same, and they are all done with guide rails. Linear modules (or linear modules) can choose ball screw or pulley as positioning. The pulley price is relatively low, but the positioning accuracy is not as good as the ball screw. It is suitable for automation equipment with low precision requirements such as packaging machinery or printing machinery.

Question 3: What is the lead of the linear module?

Answer: The lead refers to the width of the screw pitch, which refers to the linear distance of one rotation of the screw.

Question 4: What is the difference between the stroke and the lead of the linear module slide?

Answer: The stroke of the sliding table refers to the (long) distance that the sliding table can move when it is working normally, and the lead refers to the distance that the sliding table moves for each revolution of the screw driving the sliding table.

Question 5: Can the linear module driven by the servo motor be used with a sealed cover in a dusty working environment? Will it affect the screw slider? ? ? (little dust, cut iron core)

A: This environment is generally considered a bad environment. Dust or sealed construction must be used. If dust can be seen with the naked eye, it is already a very, very harsh environment. Dust entering the screw surface can cause poor screw lubrication and the end of its service life. caution! ! ! ! In this case, after three months of use, the screw was useless. Then this mod is useless.

Question 6: When choosing a linear module, I really don't know what the supplier recommends is what we want. Solve!

A: First see if it is what you want, and see what the specific configuration, parameters and specifications you need here, so that you can make a good choice.

Question 7: Who knows what a linear mod does? What trouble can you solve for me?

A: This total solution integrates the sliding key of the rolling bearing, the linear sliding block and the synchronous belt drive in one system. The timing belt provides movement protection for the sliding parts. Due to the excellent quiet running properties and high strength properties of the transmission components.

Question 8: What is the difference between the synchronous belt linear module and the ball screw linear module?

A: The stroke of the synchronous belt module is longer than that of the ball screw, but the synchronous belt module can only be used on the X axis, while the ball screw module can be used on the Z axis. And the load is different. The load of the synchronous belt module is generally 10KG. Since the specs of the two different mods are different, the speed comparison is meaningless.

There are many factors that affect the speed: stroke, generally the longer the stroke, the smaller the speed; the width of the module; the processing technology and precision of the screw, etc. , When choosing a module for a device, we should pay attention to the allowable speed, which is related to the production efficiency of the device.