The linear slide module needs to be maintained. The following is an introduction by the editor to the importance of linear module maintenance.

The linear module is an organic complex that integrates multiple skills such as fine status detection skills, driving skills, linear module orientation skills, and control skills. In these linear module production technologies, if some aspect is improved or improved, the overall functions of the linear module will be improved. Linear module features such as when the workpiece table is driven by direct drive instead of direct drive, because the reduction of the transmission chain length and error transmission in the transmission link will improve the accuracy, speed and acceleration of the workpiece table Deserve to use new data and new skills in real time to meet the needs of the workbench development.

Linear Module

The linear module is conventionally used. When regular refueling is required, different greases should be selected according to the use. Normal maintenance can extend the service life of the guide rail.

(1) Rail oil (slide oil)

(2) Dual-purpose oil for hydraulic rail

(3) Grease.

The linear slide module sometimes has water contact, such as lathes and machining centers. Water often splashes on the guide rails. If the water separation performance of the guide rail oil is not good, it will be decomposed by water and oil dripping into the cutting fluid will cause Cutting fluid is contaminated, so the water separation performance of the guide rail is extremely important. For some rough machines, the guide rails are large, the structure is simple, and the guide rails have pits. They are designed to be lubricated with grease, and most of them are manually greased with a grease gun. It is required that all grease is EP extreme pressure type, otherwise the grease remaining on the module cannot withstand heavy load after being squeezed out.