The storage of mechanical products has always been a problem that people are facing, especially with the development of mechanized automation, there are usually more mechanical products that everyone sees, so today I will introduce you to a mechanical product Storage method. Linear modules are a kind of mechanical products. Even if you buy linear modules, you usually only buy one or two, so there is not much consideration and attention on its storage; but the direct manufacturers of linear modules or It is a customer's factory and may need to store a large number of linear modules for some reasons. How should they store linear modules? What kind of impact will it cause if it is not stored properly?

Mechanical products are most afraid of rust, oxidation, exposure, demagnetization, etc. Therefore, linear modules as mechanical products must also pay attention to these problems. Linear module manufacturers and customer factories should store linear modules in large quantities. First of all, make sure that the storage environment temperature is not too high or low. It is placed at normal temperature; for the storage environment, it should not be too humid to prevent rust and oxidation.

If the linear module is not stored well, for example, in a relatively high temperature environment, it will cause the degaussing of the linear module motor or the rigidity of the screw to be reduced. If the linear module is exposed to high temperature for a long time, the Some metal objects will chemically react with oxygen, carbon dioxide, etc. in the air, resulting in damage to the linear module or loss of performance.

Of course, if the linear module is stored in a lower temperature environment, the problem of rust will easily occur, because the air will contain a large amount of moisture. After the linear module has rusted, its precision, operating speed, and service life will be greatly affected.

In simple terms, linear modules are linear modules stored at normal temperature and the environment is relatively dry. This storage environment is good; especially for linear module direct manufacturers or customer factories, when facing seasonal reasons or It is because the market environment is not stable and the shutdown is caused. It is necessary to strictly store linear modules and other production equipment to avoid failure when it is used again.